Tenax Titanium Extra Clear Knife Grade 10 lb Gallon
Tenax Titanium Extra Clear Knife Grade 10 lb Gallon
You are looking at Tenax Titanium Extra Clear Knife Grade Glue 10 lb Gallon, Titanium Vinyl Ester Adhesive
Available in 10 lb Gallon
Tenax Titanium Vinyl Ester Extra Clear Knife Grade is the latest generation of vinyl ester glue formulas. Titanium Extra Clear is virtually completely clear in film during application Tenax Titanium is extremely strong with excellent adhesion with a very fast cure time of about 15 minutes. Tenax used the latest raw resin materials to make Titanium very low yellowing in outdoor or UV applications. Titanium cures shiny and is very easily polished. Titanium takes color very well. Just a drop goes a very long way for easier color matching. Titanium is a drip-less formula glue. So it will stay on the edge and not on the floor. Titanium in the can looks very very light in color and when spreading it becomes almost invisible. This characteristic makes working with light and white colored materials much easier. With a gel time of 4-5 minutes and a full cure in about 15 minutes, the Tenax Titanium will keep the production pieces moving through the shop.
Features
Makes working with light and white colored materials much easier
Cures shiny and is very easily polished
Extremely strong with excellent adhesion
Cure to gel time of 4-5 minutes
Full cure in about 15 minutes
Technical Specs
Mixing Ratio: 100+2/3
Gel time at 77°: 4-6 min
Tacky free time at 77°: 18-20 min
Working time at 77°: 20-25 min
Temp. range for use after hardening: 32°-230°
Applications
Marble - especially white colored materials
Granite - all granites
Quartz - all quartz materials, especially the white
Ceramic and Porcelain - from the thinnest to the thickest materials, the bond is extremely strong
Shelf Life
Keep away from heat, humidity and sun. Product will last at least 10 months if kept between 68°F - 77°F.
Sizes
1CAA00BOO4 / Tenax Titanium Extra Clear Knife Grade 10 lb Gallon
Technical Data
Viscosity cps 25°C 20 r.p.m.(ASTM D2196) | Tixotropic paste |
Density at 25°C gr/cm 3 | 1.1 |
Aspect | Transparent White Paste |
Ratio of use glue/hardener | 100+2/3 |
Gel time (in bulk) at 77° (25°C) in min | 4-6 min |
Tacky free in thin layer at 77° (25°C) in min | 18-20 min |
Working time suggested at 25°C in min | 20-25 min |
Minimum reaction temperature | +5°C |
Minimum temperature of use after hardening | 32° (+5°C) |
Maximum temperature of use after hardening | 230° (+110°C) |
Shelf life at 25°C | 10 months |
Adhesion force at 25°c marble botticino after 2 hour in Mpa ASTM D 4541 | 7.5 |
Adhesion force at 25°c on natural granite after 2 hour in Mpa ASTM D 4541 | 8.4 |
Adhesion force at 25°c technical quartz after 2 hour in Mpa ASTM D 4541 | 9.7 |