Tenax Hydrex Stone Sealer is a penetrating sealer that prevents liquids (stains) from penetrating into the material through its micro-porosities. Tenax Hydrex Stone Sealer is both waterproof and oil proof. It is especially effective on polished granite and polished marbles. Tenax Hydrex Sealer allows the stone to breathe to maintain its natural characteristics. Tenax Hydrex Sealer may be used both indoors and outdoors. It does not change the color of the stone. Tenax Hydrex Sealer operates on the surface of materials.

Features

• 1 liter of Tenax Hydrex Stone Sealer will treat approximately 215-323 square feet of stone depending on the porosity of the stone.

• This product will last at least 2 years if kept between 65° and 77°.

• Normally with 1 litre it is possible to treat 20-30 square meters of stone. The consumption depends a lot from the porosity of the material.

Benefits

• Excellent for granite, carrara, thassos, trani, botticini, marfil and similar stones.

Applications

• This product must be evenly applied on a clean, dry surface.

• Spread Tenax Hydrex Stone Sealer evenly using a clean sponge or cloth.

• Apply until the surface no longer absorbs product. Repeat procedure approximately every 10-15 minutes.

• Immediately clean/buff with a clean dry cloth.

• Make sure to remove excess immediately after application. Excess product may create a superficial glossy and sticky film so it is important to apply evenly.

• If used on floors wait 24 hours before walking on surface.

Hazards

• Keep away from heat, humidity and sunlight.

• Please read the safety data sheet before usage.

• Hydrex does not provide anti-etch protection on marble surfaces.

Technical Data

• Density at 25°C gr/ml: 0,80

• Aspect: liquid

• Standard Colour: transparent/opalescent

SKU

• Tenax Hydrex Stone Sealer 1 lt /  TENAX-HYDREX-1-QT